EBC-Lite Digital Turbo Display
SW16020-28
EBC-Lite Digital Turbo Display
The EBC-Lite Digital Turbo Display is built around real-time boost readout. Its 7-segment digital display is clear, easy to read and viewable from different angles, so you can check current boost at a glance.
BAR / PSI unit switching, pressure reference calibration and an adjustable boost bar range in A and B modes let you set up the display to match your vehicle and reading habits.

Three Independent PEAK Records
EBC-Lite offers three independent modes, N, A and B, each with its own PEAK record.
Whether you drive daily, test different driving modes, or want to confirm the highest boost actually reached at full throttle, PEAK shows the maximum value at a glance.

Custom Boost Bar for A / B Modes
Besides the real-time reading, A and B modes also provide a boost bar, so rises and falls in boost are easier to follow.
A and B modes can each be set with:
START|Boost bar start position
LIMITED|Boost bar end position
You can set a boost bar range that suits your vehicle or each driving mode.
For example, if your car already has Normal, Sport or other performance modes, you can use A and B modes with different bar ranges, real-time readings and PEAK records to see how boost changes in each mode.
Even without a 3-port solenoid connected, A and B modes still let you set START and LIMITED. In that case it only defines the boost bar display range and does not control boost.
AUX External Trigger Support
A and B modes of the EBC-Lite both support the AUX external trigger, which you can use with an external signal depending on your vehicle setup and needs.
AUX is a function of A and B modes themselves and is not affected by whether a solenoid is installed.
So whether you use the EBC-Lite purely as a digital turbo display or upgrade it to an electronic boost controller later, the AUX external trigger remains available.

Switchable Display Units
Supports both BAR and PSI pressure units. Switch directly according to your region, vehicle setup or reading preference, with no manual conversion needed.

Pressure Reference Calibration
Altitude, ambient pressure and installation conditions can cause slight differences in the pressure reference.
EBC-Lite provides a pressure reference calibration function that adjusts the display reference to current conditions, so the boost reading stays closer to the actual state of the vehicle.
Independent Pressure Reading for Many Turbo Systems
EBC-Lite reads intake manifold pressure directly through its own MAP sensor, so when used purely as a digital turbo display it does not need to interfere with the factory wastegate control system.
As long as intake manifold pressure can be read correctly, real-time boost display and PEAK records are available. Whether the vehicle uses a mechanical actuator, vacuum control or an electronic wastegate, it can be used as a pure boost gauge.
Product Contents
The EBC-Lite Digital Turbo Display comes with a full set of installation parts, including a manifold pressure sensor (MAP sensor), a T-fitting, vacuum hose and a vacuum hose oil-vapor filter, so manifold pressure can be read and displayed right away.

The EBC-Lite itself also keeps the program and control functions of an electronic boost controller. The package includes spare parts for later boost control, namely the solenoid connecting wire, terminals, waterproof plugs and connector, which makes future expansion easier.
If the vehicle uses a positive-pressure wastegate actuator and the boost system suits control through a 3-port solenoid, simply add a compatible 3-port solenoid to enable the EBC-Lite's boost control.
Recommended add-ons (sold separately or supplied by you)
Shadow 3-port solenoid
MAC 35 Series 3-port solenoid
Upgrading does not require replacing the display or the main unit. Once the 3-port solenoid's piping, wiring and settings are done, the digital turbo display becomes an electronic boost controller.

Connect a 3-Port Solenoid and A / B Enter Control Mode
When the EBC-Lite is connected to a compatible 3-port solenoid, N, A and B modes can be used separately for different purposes.
N Mode|Display-only mode
N mode keeps the real-time boost display and PEAK record and does not control the solenoid.
Use it for daily driving, or keep the original boost state as the baseline for A and B modes.
A / B Mode|Boost control mode
With a 3-port solenoid connected, A and B modes can each be set with different boost control parameters, while keeping the real-time boost display, boost bar, PEAK record and AUX external trigger.
You can keep N mode as the original boost baseline, then set two independent boost control modes, A and B, for different driving needs.

- Download
Know you the best
SHADOW will not only be a pronoun of global automotive electronics products in the future, but also a good partner for modified car owners! Let more people experience the pleasure and convenience of modified vehicles through SHADOW's products!
Advantage
FD EVO OBD II Multi-functional Display The FD EVO Multi-Functional Display offers a variety of display modes and user-friendly operations. Utilizing OBDII CANBUS communication technology, it performs comprehensive vehicle scanning and monitors... Read More






