Digital Meter T1 For Tesla QA
Q1: How to install and will it affect the vehicle warranty?
A: D-Meter T1 uses a dedicated Tesla communication connector. It is truly plug-and-play, requires no additional power supply or wire modification, and will not affect the vehicle warranty.
- Model 3: The connector is located behind the center armrest
- Model Y: The connector is located under the center console
Remove the trim panel to find the original blue connector, carefully unplug it, and insert the adapter cable.
Q2: Is my Tesla compatible?
A: D-Meter T1 is compatible with Tesla Model 3 (2017–2023) and Model Y (2020–2024). It is not supported on Model 3 Highland and Model Y Juniper versions.
Q3: How does the display power on?
A: When the driver enters the vehicle and presses the brake pedal, D-Meter T1 will power on and synchronize with the vehicle communication.
Q4: What data can be displayed?
A: It supports displaying vehicle speed, gear position, battery level, motor and battery coolant temperature, tire pressure, turn signals, and more. Actual data availability depends on the vehicle model year.
Q5: How many values can be displayed at once?
A: Each screen can display up to three main parameters:
1. Vehicle speed
2. Coolant temperature
3. Tire pressure
Q6: Why do warning flashes and beeps occur while driving?
A: This is the default overspeed alert set at 120 km/h. You can adjust the threshold in the settings menu or disable the function completely.
Q7: Why doesn’t the display turn off immediately after shutdown?
A: After shutting down, Tesla vehicles continue communication for several minutes. D-Meter T1 will turn off automatically once the system is fully powered down, no manual action is required.
Q8: Why does the speed reading disappear in standby mode?
A: This is the screen saver mode. The device enters a semi-sleep state, and the display will resume once vehicle activity is detected.
Q9: The screen is too bright or too dim, can it be adjusted?
A: The brightness is automatically adjusted according to the Tesla central display. Manual adjustment is also available in the settings menu.
Q10: Can the ambient light color be changed?
A: Yes, the built-in RGB ambient light supports seven colors and adjustable brightness, which can be customized based on personal preference.
Q11: Are there restrictions on installation location?
A: The device can be installed in most areas inside the vehicle. The recommended location is the air vent for optimal visibility.
Q12: Do I need to unplug the connector after turning off the car?
A: No. The device will automatically power off with the vehicle and has no parasitic current issue.
- Related Products
Know you the best
SHADOW will not only be a pronoun of global automotive electronics products in the future, but also a good partner for modified car owners! Let more people experience the pleasure and convenience of modified vehicles through SHADOW's products!
Advantage
Water Temperature Racing Gauge The Shadow Water Temperature Racing Gauge features a highly responsive needle that provides real-time, accurate readings of coolant temperature, allowing drivers to monitor engine conditions at all times... Read More