X-FLAP TVH Aftermarket Vacuum Valve Controller | X-FLAP TVH|Aftermarket Vacuum Valve Controller - Shadow

Designed for aftermarket vacuum exhaust valves, with an included vacuum solenoid valve and remote, app or external signal control

Hot Products

Technology X Function

Technology X Function

Highly recognizable and still clear in the sun.

More
Your Valves, Your Call

Your Valves, Your Call

X-FLAP OEM leaves the factory system as it is and lets you switch valve states from a remote or the app.

More
Set When Boost Comes In

Set When Boost Comes In

EBC-Lite sets when boost engages, how quickly it builds, and when overboost protection steps in.

More

X-FLAP TVH Aftermarket Vacuum Valve Controller | Features, Sizes & Options – Shadow

Since 1999 in Taiwan, Shadow builds automotive gauges and controllers for street & track. 99.43% yield, clear wiring diagrams, and step-by-step install guides. Explore specs or request a fast quote.

X-FLAP TVH Aftermarket Vacuum Valve Controller (X-FLAP TVH Aftermarket Vacuum Valve Controller) Engineered for accuracy: environmental testing, precision calibration, real-vehicle validation, and firmware checks. Universal 12V, plug-and-play wiring for quick installs. View install steps & troubleshooting.

25+ years in performance electronics—gauges, controllers, OBD2 displays, Turbo Timers. Compare specs, check fitment, and contact Shadow for dealer pricing or support.

X-FLAP TVH Aftermarket Vacuum Valve Controller

X-FLAP TVH|Aftermarket Vacuum Valve Controller

Designed for aftermarket vacuum exhaust valves, with an included vacuum solenoid valve and remote, app or external signal control
Designed for aftermarket vacuum exhaust valves, with an included vacuum solenoid valve and remote, app or external signal control

X-FLAP TVH is Shadow's standalone controller for aftermarket vacuum exhaust valves, and the kit includes the vacuum solenoid valve. Drivers switch between ON, OFF and AUTO from the remote or the smartphone app. In AUTO, the valve opens and closes on an external +12V signal, and an R-Commander2 or EBC-Lite can trigger it by RPM or boost. It suits adding a vacuum valve, upgrading how an existing one is controlled, or replacing a failed factory vacuum solenoid or controller.

X-FLAP_TVH_Flyer_EN_Simple-Flyer

You Decide When the Exhaust Valve Opens and Closes

A vacuum-actuated exhaust valve opens and closes through vacuum suction and a spring mechanism, while a solenoid valve switches the vacuum path to change the exhaust note. The design is simple and responds directly. Besides aftermarket exhaust systems, some performance cars and supercars also use vacuum valves.

Shadow X-FLAP TVH is a standalone controller designed for aftermarket vacuum exhaust valves. The included vacuum solenoid valve controls the vacuum path. Together with a wireless remote and the X-FLAP app, it lets you switch the valve open or closed, set a startup mode, or connect an external signal for automatic control.

Whether you are adding a vacuum valve, upgrading how an existing one is controlled, or replacing a failed factory vacuum solenoid or controller, TVH provides a standalone control solution.

X-FLAP_TVH_Flyer_EN_Product-and-Brand-Positioning

Who Is X-FLAP TVH For?

TVH does not require the vehicle to come with an exhaust valve. Depending on your setup, it fits three situations:

01|New Installation
The vehicle has no exhaust valve, and you want to add a vacuum valve exhaust system.
Combine vacuum valves, vacuum lines, and TVH to build a standalone control system.

02|Control Upgrade
The vehicle already has a vacuum exhaust valve, and you want to decide when it opens and closes.
Use the remote, the app, or an external signal for more flexible operation.

03|Failure Replacement
The vehicle already has a vacuum exhaust valve, but the factory vacuum solenoid or controller has failed.
Keep the original vacuum lines and valve mechanism, and replace the factory parts with the TVH controller and solenoid valve. The control wiring must be reconfigured.
There is no need to replace the entire exhaust system.

Always confirm the vacuum source, line layout, and valve operation before installing. If the factory ECU monitors the solenoid for faults, switching to standalone control may still trigger related fault codes.

App and Remote: Three Valve Control Modes

X-FLAP TVH offers ON, OFF, and AUTO modes, which you can switch in real time with the wireless remote or the X-FLAP app.

ON|Valve Fully Open
Opens the exhaust valve so exhaust flow passes through the open passage.

OFF|Valve Closed
Closes the exhaust valve for a different exhaust note.

AUTO|Automatic Control
Receives an external +12V trigger signal and switches the valve according to the signal.

For everyday use, the remote switches modes quickly. To change the startup mode or the valve operating direction, use the app.

X-FLAP_TVH_Flyer_EN_Three-Modes

X-FLAP_TVH_Flyer_EN_Remote-and-APP-Sync

Custom Startup Mode, Keep the Control You're Used To

There is no need to reset the valve every time you start the car. The X-FLAP app offers four startup default options:

ON: The valve starts fully open.
OFF: The valve starts closed.
AUTO: The system starts in external-signal automatic control.
LST: Remembers the last mode (ON, OFF, or AUTO) used before the engine was shut off, and restores it at the next startup.

X-FLAP_TVH_Flyer_EN_Default-Mode-Setting

For example, if AUTO was the last mode used, the next startup restores AUTO even if the valve was open when the engine was shut off. The valve then follows the current external trigger signal.

Different vacuum valves also operate differently. Some open when vacuum is applied, and others close.

The app's REVERSE SWITCH reverses the solenoid output so the ON and OFF commands match the correct valve action.

AUTO Mode: Switch by RPM or Boost

Besides manual control, TVH can receive an external +12V signal through the yellow trigger wire and switch the exhaust valve automatically under set conditions.

Paired with other Shadow control devices, it supports different applications:

Shadow R-Commander2: Triggers at a set engine RPM.
Shadow EBC-Lite: Triggers at a set boost pressure.

Example
The valve stays closed during low-RPM daily driving. When engine speed reaches the set threshold, the external device outputs a +12V signal and TVH switches the valve open. When the condition ends, the valve closes again.

Before Using AUTO Mode

AUTO mode requires an external device with a compatible trigger output. TVH does not read engine RPM or boost pressure itself.

If no +12V trigger signal is received, the valve stays OFF (closed) in AUTO mode. Using REVERSE SWITCH to change the output direction does not change the AUTO on/off logic.

X-FLAP_TVH_Flyer_EN_Yellow-Trigger-Wire

Standalone Power and Vacuum Line Setup

TVH uses a standalone power supply and solenoid control architecture, so the vehicle does not need factory exhaust valve control wiring to run a standalone vacuum valve control system.

Installation mainly involves:

Power: Connect ACC +12V and GND. The power cable comes with a 5A fuse.
Solenoid valve: Connect the included 100 cm solenoid valve signal cable to the TVH unit.
Vacuum lines: Set up the vacuum source, one-way valve, T-fitting, and vacuum valves.
AUTO trigger: To use automatic control, connect the yellow signal wire to an external +12V trigger source.

If the vehicle already has a vacuum exhaust valve, you can reuse the existing vacuum lines and valve mechanism after confirming compatibility. Install the TVH controller and solenoid valve in place of the factory parts, without building a new valve system.

Mount the unit and the solenoid valve where the vehicle layout, vacuum source, and exhaust routing allow. Secure both firmly, and avoid spots that collect water, sit near exhaust heat, or have moving parts.

A one-way valve is required. Check the vacuum flow direction against the direction markings so the valve operates correctly.

X-FLAP_TVH_Flyer_EN_Wiring-Diagram

Single or Dual Valve, Both Supported

X-FLAP TVH controls the vacuum path through the included vacuum solenoid valve and suits different exhaust configurations.

Single-valve system: The vacuum line runs from the solenoid valve to one vacuum exhaust valve and controls it open and closed.
Dual-valve system: The vacuum line from the solenoid valve to the exhaust valves splits in two through a T-fitting, one to each of the left and right vacuum valves, so both operate in sync.

A dual-valve system needs only one TVH unit and one solenoid valve, with no second controller. Confirm the vacuum source, line layout, and operation of both valves before installing.

X-FLAP_TVH_Flyer_EN_Wiring-Instructions

X-FLAP App and Kit Contents

Standard Kit Contents
Control unit × 1
Wireless remote × 1
Waterproof cover × 1
Power cable with 5A fuse × 1
Solenoid valve signal cable (100 cm) × 1
Vacuum solenoid valve × 1
Solenoid mounting bracket × 1
Vacuum T-fitting × 1
One-way valve × 1
APP Card × 1
Simple Instruction Manual × 1
Accessories

Vacuum lines and the vacuum exhaust valve mechanism are not included. Prepare them separately to suit your vehicle and exhaust system.

X-FLAP_TVH_Flyer_EN_EA4-Kit-Contents

Installation and Usage Notes

Confirm the vehicle has a suitable, stable vacuum source before installing.
Install the one-way valve correctly, and check the connection direction of the solenoid valve and vacuum lines.
Keep vacuum lines and the valve mechanism away from high-heat areas, and secure them firmly.
Before using AUTO mode, confirm the external device provides a compatible +12V trigger signal.
If you replace the factory vacuum solenoid or controller, check whether the factory ECU will log fault codes when the control circuit is disconnected.

TVH provides standalone vacuum valve control. Actual fitment depends on the vehicle's vacuum system, valve mechanism, and installation setup.

Related Products
  • R-Commander2 Digital RPM Activated Switch Controller - Capture the engine RPM signal and trigger a +12V voltage output when the RPM reaches the set value.
    R-Commander2 Digital RPM Activated Switch Controller
    SW10165-03

    The R-Commander 2 Digital RPM Activated Switch Controller is suitable for professional modification enthusiasts and users who need precise control of other electronic devices based on engine RPM.


  • EBC-Lite Digital Turbo Display - Real-time boost display with individual PEAK records for N, A and B modes
    EBC-Lite Digital Turbo Display
    SW16020-28

    The EBC-Lite Digital Turbo Display is built around real-time boost readout. Its 7-segment digital display is clear, easy to read and viewable from different angles, so you can check current boost at a glance. BAR / PSI unit switching, pressure reference calibration and an adjustable boost bar range in A and B modes let you set up the display to match your vehicle and reading habits.



Download


Know you the best

SHADOW will not only be a pronoun of global automotive electronics products in the future, but also a good partner for modified car owners! Let more people experience the pleasure and convenience of modified vehicles through SHADOW's products!

 Advantage