Radiator Cooling Fan Controller
SW10078
Radiator Cooling Fan Controller
You decide when the cooling fan starts.
The ECU controls the fan based on coolant temperature, A/C demand and vehicle status. It mainly serves daily driving, but in summer traffic, low airflow, heavy load or hard driving, coolant temperature can climb past the ideal range. Starting earlier takes more flexible control.
The Shadow controller sets the start temperature from 70 to 100°C and switches your OEM or aftermarket fan through an external relay. It also monitors coolant, oil temperature and voltage.

Set Your Own Fan Activation Temperature
Adjustable from 70 to 100°C, so cooling can start earlier.
Every engine and driving environment has different cooling needs. Shadow lets you choose when the fan comes on instead of relying only on the factory trigger point.
- Activation temperature: adjustable from 70 to 100°C.
- Auto fan-stop: when coolant temperature drops 5°C below the set value, the controller stops its fan output.
- Settings memory: your settings are kept after power loss, so there is nothing to re-enter.


How Should You Set the Activation Temperature?
Cooling earlier also depends on the rest of the cooling system.
A common starting point is about 5–10°C below the factory fan activation temperature. From there, adjust to your engine's operating temperature and how you actually drive.
To bring overall operating temperature down further, look at the thermostat's opening temperature. A low-temperature thermostat suited to your vehicle lets coolant start circulating through the radiator earlier, which works together with an earlier fan start to shape the overall cooling strategy.
The fan controller and the thermostat do different jobs, and they work best when matched sensibly. A lower activation temperature is not automatically better.

An Independent Sensor for Coolant Temperature

It measures temperature directly and does not rely on the factory OBDII.
An NTC temperature sensor installed in the cooling system provides the coolant temperature that decides when the fan starts.
The kit also includes an oil temperature sensor, so you can follow both coolant and oil temperature. Both sensors need an adapter for installation, and adapters are sold separately.
Learn more about adapters: Radiator Hose Coolant Temp Sensor Adapter

Learn more about adapters: Oil Filter Adapter / Sandwich Plate

Three Readings on One Display
Besides controlling the cooling fan, the controller also monitors coolant temperature, oil temperature and voltage.
- Coolant temperature: 10–150°C
- Oil temperature: 50–150°C
- Voltage: 8–18V
Use the digital LED display to switch between readings, or set it to cycle through them automatically.
Warning thresholds can be set. When a reading reaches its threshold, the display and indicator lights flash so you can keep an eye on the vehicle.
Fan activation is based on coolant temperature only. Oil temperature and voltage are for monitoring and warnings.

Installation Options for Different Cooling Needs
Keep the factory control, or add supplemental cooling.
Shadow switches the fan through an external relay, so you can pick the installation method that fits the vehicle's existing wiring and your setup. A 12V / 30A relay is included in the package. The controller's signal wire only triggers the relay, and the relay switches the fan load.

Keep OEM ECU fan control
On compatible conventional relay-controlled systems, the Shadow controller can be added alongside the factory circuit. The fan starts earlier at your set temperature while the factory ECU control stays in place.

Independent DC fan control
Suited to conventional electric fan setups. An external relay forms a separate activation circuit. Choose the wiring diagram that matches whether your fan is switched on the positive or negative side.


Supplemental cooling fan
Add an auxiliary DC fan on the radiator, oil cooler or transmission oil cooler for extra cooling control.
Installation Notes
- For 12V vehicles and compatible DC fan control systems. PWM speed-controlled fans are not supported.
- Fan power must run through a relay and fuse rated for the load (a fuse of 30A or less is recommended). It must never be powered directly from the controller's signal wire.
- If you wire it alongside the OEM ECU fan control, first confirm the vehicle's circuit and control method so factory functions are not disturbed.
- Install the temperature sensor where it reflects the coolant temperature you intend to monitor.
- The controller, fan and relay must share a common ground. Use proper terminals and heat-shrink tubing.
Specification
| Power Cable | 50cm |
| Control Box - Relay Cable | 180cm |
| Relay- Fan Cable | 180cm |
| Sensor Cable | 190cm |
| Sensor Thread | 1/8 NPT |
Photos
- Set the fan controller to be opened in the temperature range of 70°C ~ 100°C.
- Engine cooling fan controller can check water temp, oil temp, voltage value
- Engine cooling fan controller can improve the heat dissipation efficiency.
- Movies
- Related Products
Oil filter adapter/ Sandwich Plate
Oil pressure sensor adapter, which can also be called as oil filter sandwich plate adapter, is a kit connected to the oil filter element. This is where the oil circulating filters the oil impurities and can measure the pressure and temperature of the oil. The oil filter element can be divided into general type and paper. The oil adapter is suitable for general oil filter element. Most Japanese models, such as Toyota, Honda, Nissan, Mitsubishi, Mazda, Suzuki, Subaru and so on, use general filter elements. The thread of the oil filter element is divided into 3/4-16UNF and M20*1.5P. The general oil pressure sensor adapter is attached with two specifications of threads. GT86 adapter is higher than the other adapter which have been specially developed for Subaru FA20,FA24(BRZ/GR86/WRX/Forester XT)、Honda L15B (CRV5/CIVIC 10 )、Honda K20C1(FK2/FK8)。In addition, oil pressure sensor adapter have been specially developed for European cars. For example, VAG Group's EA113 and EA211 engines are two engines. EA113 /2.0 TSI engine include car model: Audi A3/S3, Audi A4, Audi A6, Audi TT/TTS, VW Jetta, VW Golf GTI/R, VW Tiguan, VW Scirocco, VW Passat B6, SEAT Leon FR Mk2, SEAT Leon Cupra, SEAT Altea, SEAT Toledo Mk3, SEAT Exeo。EA211 /1.4 TSI engine include car model: Volkswagen Golf, Volkswagen Jetta, Volkswagen Passat, Skoda Octavia, Skoda Rapid, Skoda Superb, Audi A3, Audi A4。Above car models have corresponding oil pressure sensor adapter.
Radiator Hose Coolant Temp Sensor Adapter
Water Temperature Sensor adapter, also known as Radiator Hose Tee Fittings are the accessories of the water temperature electronic racing gauge. Used in the engine radiator hose and measure the coolant temperature by the temperature sensor.Since the inner diameter of the hose is different for each car, we developed several sizes includes 28mm,30mm,32mm,34mm,36mm,38mm and 40mm. Available in Europeans and American car brands: AUDI, BMW, MERCEDESBENZ, MINI,OPEL,PORSCHE,SEAT,SKODA, SMART, VOLKSWAGEN, ACURA, ALFA ROMEO, FORD, DODGE,FIAT, JAGUAR,CHEVROLET。 Asian car brands: TOYOTA,HONDA,NISSAN,MITSUBISHI,SURBARU,MAZDA,LEXUS,INFINITI,SUZUKI,DAIHATSU,ISUZU
- Download
Know you the best
SHADOW will not only be a pronoun of global automotive electronics products in the future, but also a good partner for modified car owners! Let more people experience the pleasure and convenience of modified vehicles through SHADOW's products!
Advantage
FD EVO OBD II Multi-functional Display The FD EVO Multi-Functional Display offers a variety of display modes and user-friendly operations. Utilizing OBDII CANBUS communication technology, it performs comprehensive vehicle scanning and monitors... Read More






